SMARC defines the input power source to be 3V~5.25V. Once you can assure the power of SMARC module is good, you can decide yourself the voltage level to be pulled up. It does not matter if there is ovp or uvp.
Tags: SMARC Control SignalsVIN_PWR_BAD#:
Can VIN_PWR_BAD# be pulled up to VDD_MOD? In other words is an OVP and UVP IC required?
- Last update:
- 2014-08-16 18:14
- Author:
- Eric Lee
- Revision:
- 1.5
You can comment this FAQ