Instant Response
Add new FAQ
Add question
Open questions
Embedian FAQs Management System
All categories
SMARC T335X Hardware Design
SMARC T335X Linux Development
SMARC T335X Yocto/Arago Distro Build
SMARC-T4378 Linux Development
4 users online | 4 Guests and 0 Registered
Search
Advanced search
All Categories:
FAQs
Linux development faqs for SMARC-T4378
I'm trying to use SPI master capability of SMARC-T4378. HW setup 1. SMARC-T4378 2. EVK-STD-CARRIER with populated second ETH 3. oscilloscope monitoring at carrier board SPI0.0 SPI0.1 SPI1.0 SPI1.1 SW Many combination tried -The standard kernel from delivered SDCARD - Self build kernel from embedian GIT - it seems that SPI master is enable by default. McSPI is also enabled when I check with menuconfig - arago rootfs tar.gz downloaded from embedian. In user space I can see /dev/spidev2.0 /dev/spidev2.1 /dev/spidev3.0 /dev/spidev3.1 Write to this devices from C returns no error but I dont see any activity on EVM_STD_CARRIER SPI connectors. Comments, suggestion, remarks are welcome. Thanks in advance, Mirtcho Maglijanov
(18172 views)
1
Linux development faqs for SMARC-T4378
Tags
Ethernet
GPIO
LCD Resolutions
Pinmux
SDK6
SDK7
SMARC Control Signals
USB WiFi
v3.12
v3.2