Languages:  English  Traditional Chinese  
ARM Cortex SMARC Module
$59.00 for orders of 1,000+



  • Marvell PXA320 XSCALE Core @806Mhz (ARM V5TE instruction set compatible)
  • 128MB Mobile DDR
  • 128MB NAND Flash
  • Display: Parallel RGB and LVDS LCD
  • Compact Flash Interface
  • 10/100Mbps Ethernet x 1
  • COM x 3, USB 2.0 x 2, SPI x 2, I2C x 1, AC97 x 1, GPIO x 12
  • Typical 2W

The MXM-8310 Computer on Module subassembly supports the Marvell XScale® PXA320. The PXA320 delivers advanced peripheral integration and industry-leading processing features for high-end industrial embedded solutions
The MXM-8310 provides Ethernet, communication transceivers, power management, on-board memory and is an ideal solution for space-sensitive, low-power applications.

Technical Information
Marvell PXA320

32-bit XSCALE Core at 806Mhz complies with ARM Architecture V5TE instruction set

Onboard 128MB NAND Flash (SLC)

Onboard 128MB Mobile DDR Memory

1 x 10/100 Mbps Ethernet

18-bit Color Depth Parallel LCD

1 x CF, 1 x USB 2.0 Host

1 x USB 1.1 Host, 1 x USB 2.0 Device

Additional Interface:
3 x UARTs (Two ports with CTS and RTS, and another with Full RS232 signals)

2 x SPIs

1 x I2C

1 x AC97

4 x PWMs

12 x GPIOs

4 x ADCs

1 x External RTC chip (MAXIM DS1337)

1 x WDT

SW Support:
Linux Mainline (Ubuntu 12.04)

Power Consumption:
2 Watts Typical

Normal Temperature: 0oC ~ 60oC

Industrial Temperature: -40o ~85oC

10% ~ 90% relative humidity, non-condensed

Power Supply
Operates directly from fixed 5V power supply from carrier board

Form Factor
MXM Form Factor
66 mm x 50 mm (W x L)

Evaluation Baseboard
5V 4-way mini-ATX connector

Reset Button

RTC backup battery


LVDS and parallel RGB LCD connector

1 x 10/100Mbps RJ-45 connector

1 x serial debug RJ45 connector

4 x USB host type A connector, 1 x mini USB client connector

1 x 4-wire touch connector

3.5mm Microphone and Headphone Jack

3 x RS232 header (One can be configured as RS422/485), 1 x 2x7-pin GPIO header, 1 x JTAG header

1 x I2C Connector (for capacitive touch), 2 x SPI connector

1 x CF connector

jumpers for LCD 3.3V or 5V voltage, RS232 or RS485 selection

Form factor: 102mm (L) x 145mm (W)

Document Deliverable
Linux BSP

Carrier Board Design Guide

User’s Manual

Carrier Board Reference Schematics (pdf and OrCAD format)


Ordering Information
Part Number:

MXM-8310 computer on module in normal temperature

MXM-8310 computer on module in industrial temperature

MXM-8310 Evaluation Board, Package includes an MXM-8310 module, a baseboard, a 12V Power Supply, a 12V-5V DC-DC converter board, a null modem cable and a 4GB firmware pre-installed CF card

MXM-8310-I Evaluation Board, Package includes an MXM-8310-I module, a baseboard, a 5V Power Supply, a 12V-5V DC-DC converter board, a null modem cable and a 4GB firmware pre-installed CF card

Your IP Address is: