MXM-7110 is an Ethernet enable and entry-level module in world first MXM form factor for simple industrial control. It uses the Samsung S3C2440A ARM920T as a core clocking at 400Mhz. MXM-7110 features state of the art technology, aiming at simple control system in light industry. It also provides all the interfaces needed in a modern embedded device through a 242-pin MXM golden finger connector as interface. Other features are: Technical Information
Processor:
Samsung S3C2440A
32-bit ARM920T Core at 400Mhz
Memory:
Onboard 64MB NAND Flash (SLC)
Onboard 64MB SDRAM Memory
Networking:
1 x 10/100 Mbps Ethernet
Display:
18-bit Color Depth Parallel LCD
Expansion:
1 x CF, 1 x SDHC, 2 x USB 1.1 Host
USB:
2 x USB 1.1 Host (one can be configured as a client port)
Additional Interface:
3 x UARTs (Two ports with with handshaking)
2 x SPIs
1 x I2C
1 x AC97
4 x PWMs
12 x GPIOs
4 x ADCs
1 x WDT
SW Support:
Linux 2.6.18.1
Power Consumption:
1.5 Watts Typical
Environment
Thermal:
Normal Temperature: 0oC ~ 60oC
Extended Temperature: -25o ~80oC
Humidity:
10% ~ 90% relative humidity, non-condensed
Power Supply
5V
Operates directly from fixed 5V power supply from carrier board
Form Factor
MXM Form Factor
66 mm x 50 mm (W x L)
Evaluation Baseboard
Features:
5V 4-way mini-ATX connector
Reset Button
RTC backup battery
Buzzer
LVDS and parallel RGB LCD connector
1 x 10/100Mbps RJ-45 connector
1 x serial debug RJ45 connector
4 x USB host type A connector, 1 x USB client type B connector
1 x 4-wire touch connector
3.5mm Microphone and Headphone Jack
5 x RS232 header (One can be configured as RS422/485), 1 x 2x7-pin GPIO header, 1 x JTAG header
1 x I2C Connector (for capacitive touch), 2 x SPI connector
1 x CF connector
1 x SDHC connector
jumpers for LCD 3.3V or 5V voltage, RS232 or RS485 selection
Form factor: 102mm (L) x 180mm (W)
Document Deliverable
Linux BSP
Carrier Board Design Guide
User’s Manual
Carrier Board Reference Schematics (pdf and OrCAD format)
Toolchain
Ordering Information
Part Number:
Description
MXM-7110
MXM-7110 computer on module in normal temperature
MXM-7110-E
MXM-7110 computer on module in industrial temperature
EVK-MXM-7110
MXM-7110 Evaluation Board, Package includes an MXM-7110 module, a baseboard, a 12V Power Supply, a 12V-5V DC-DC converter board, a null modem cable and a 4GB firmware pre-installed CF card
EVK-MXM-7110-E
MXM-7110-E Evaluation Board, Package includes an MXM-7110-E module, a baseboard, a 5V Power Supply, a 12V-5V DC-DC converter board, a null modem cable and a 4GB firmware pre-installed CF card
|