Languages:  English  Traditional Chinese  
ARM Cortex SMARC Module
$59.00 for orders of 1,000+



  • MXM-6410 module bring-up platform for hardware and software development.
  • MXM-6410 module validation platform
  • Customer evaluation platform
  • Customer carrier design reference
  • Manufacturing test platform
  • Compatible to all MXM series modules from Embedian
  • Technical supports in higher priority from Embedian

The EVK-MXM-6410 facilitates the development of MXM-6410 applications. It minimizes installation requirements and reduce dramatically design time. It helps to control and cut-back pre-market costs. Evaluation boards are recommended for testing in every design-in.

Packing Lists
Packing Lists:
1 x MXM-6410 module

1 x 7-inch 800x480 LVDS LCD (PVI PM070WL4)

1 x QUICKBASE-6410 carrier board

2 x M3 screws

1 x 5V/2.5A Power Supply

1 x 4GB SDHC card with image pre-installed

1 x 10-way box header to DB9 console debug cable

1 x null modem cable

Evaluation Baseboard Features
5V input with 4-way mini-ATX connector

Reset button

RTC backup battery

4 x USB 2.0 Host Type A connector and 1 x USB OTG mini connector


LVDS and parallel RGB LCD connector

1 x 10/100Mbps RJ-45 connector

1 x 10-way serial debug header

2 x USB host type A connector, 1 x USB Host Header, 1 x USB client type B connector

1 x 4-wire touch connector

3.5mm Microphone and Headphone Jack

5 x RS232 header (One can be configured as RS422/485), 1 x 2x7-pin GPIO header, 1 x I2C header (for capacitive touch) and 2 x SPI header

1 x SDHC connector

jumpers for LCD 3.3V or 5V voltage, boot selection, RS232 or RS485 selection

Form factor: 102mm (L) x 145mm (W)

Document Deliverable
Linux BSP

Windows CE 6.0 BSP

Carrier Board Design Guide

User’s Manual

Carrier Board Reference Schematics (pdf and OrCAD format)


Ordering Information
Part Number:

MXM-6410 computer on module in normal temperature

MXM-6410 computer on module in extended temperature

MXM-6410 Evaluation Board

MXM-6410-E Evaluation Board

Your IP Address is: