Languages:  English  Traditional Chinese  
ARM Cortex SMARC Module
$59.00 for orders of 1,000+

EVK-STD-CARRIER

Highlight

  • SMARC Module 1.0 and 1.1 Compliant
  • SMARC module bring-up platform for hardware and software development.
  • SMARC module validation platform
  • Customer evaluation platform
  • Customer carrier design reference
  • Technical supports in higher priority from Embedian

Possible Applications

  • Flexible prototyping vehicle
  • Manufacturing test platform.
  • An "application ready" single board computer. (together with SMARC module)


SMARC LOGOYocto Project LOGO
Add to Cart:

Price by Quantities/Lot
1-49
$399.00
50+
$379.00



EVK-STD-CARRIER is a full function evaluation carrier board designed for standard SMARC module. It is compatible with SMARC module v1.0 and v1.1. It supports almost all interfaces and signals that are defined in SMARC specification. EVK-STD-CARRIER serves as an universal evaluation and starter kit for SMARC computer on module. Use it to quickly turn your SMARC modules into fully working device for hardware and software development.
Beside that, it enable early validation of the interfaces that needed in your carrier design. Beyond this, it facilitates early application development for carrier board designs and production testing. Further in the product cycle, it acts as a reference platform to help root-cause any incompatibilities between the SMARC module and cariier board.

Packing Lists
Packing Lists:
1 x EVT-STD-CARRIER carrier board

4 x M2.5 screws

1 x 4GB SDHC card with image pre-installed (only when purchase together with Embedian SMARC modules)

1 x LVDS cable

1 x LVDS LCD Backlight cable

1 x 12V/3A Power Supply

1 x SATA Power cable

1 x 10-way box header to DB9 cable


Evaluation Baseboard Features
DC +12V ~ +24V Power input with 2.5mm DC Jack

Accept 1.8V VDDIO and 3.3V VDDIO SMARC compliant module

LVDS LCD backlight control signals

RTC backup battery holder

Buzzer

single/dual-channel LVDS, HDMI and DSUB15 VGA (from 24-bit parallel RGB signals)

1 x 10/100/1000Mbps RJ-45 connector

2 x USB host type A connectors, 1 x mini USB client connector

2 x CAN BUS headers, 4 x RS232 (Two with DB9 can be configured as RS422/485, two with headers), 1 x 2x7-pin GPIO header, Audio microphone and headphone connector, 2 x I2C headers (for capacitive touch) and 4 x SPI headers

1 x SDHC connector and 4GB eMMC on Carrier Board

1 x SATA Connector

2-LANE and 4-LANE CAMERA interfaces for camera module

1 x PCIe and 2 x mini-PCIe Connectors

A single 4KB EEPROM is provided on I2C0 that holds the board information. This information includes board name, serial number, and revision information.

1 x external watchdog reset

jumpers for LCD 3.3V or 5V voltage, boot selection, RS232 or RS485 selection, SMARC 1.0 or SMARC 1.1 selection

Form factor: 170mm (L) x 170mm (W) (mini-ITX form factor)


Document Deliverable
Linux Yocto BSP, and Android 6.0+ BSP

SMARC Carrier Board Design Guide

User’s Manual

Carrier Board Reference Schematics (pdf and OrCAD format)

Carrier Board Schematics Checklist

PinMux file


Ordering Information
Part Number:
EVK-STD-CARRIER


Customers who bought this product also purchased...

Your IP Address is: 54.161.108.158