\n
Note 1:<\/strong><\/em><\/p>\n\n\n\nFor u-boot 2023.04<\/mark> and Linux kernel 6.1.55<\/mark> (Paired from NXP Yocto Mickledore<\/mark> release)<\/strong><\/p>\n\n\n\n$ git clone https:\/\/github.com\/embedian\/smarc-uboot.git v2023.04 -b emb_lf_v2023.04<\/p>\n\n\n\n
Note 2:<\/strong><\/em><\/p>\n\n\n\nFor u-boot 2022.04<\/mark> and Linux kernel 5.15.71<\/mark> (Paired from NXP Yocto Kirkstone<\/mark> release)<\/strong><\/p>\n\n\n\n$ git clone https:\/\/github.com\/embedian\/smarc-uboot.git v2022.04 -b emb_lf_v2022.04<\/p>\n<\/div><\/div>\n\n\n\n
Configure and Build:<\/p>\n\n\n\n
<\/button><\/p>
\n
$ make ARCH=arm CROSS_COMPILE=${CC} distclean<\/p>\n\n\n\n
$ make ARCH=arm CROSS_COMPILE=${CC} smarcfimx6_quad_2g_ser3_defconfig<\/p>\n\n\n\n
$ make ARCH=arm CROSS_COMPILE=${CC}<\/p>\n<\/div><\/div>\n\n\n\n
\n\n\n\n
<\/button>Notes<\/strong><\/strong><\/p>\n
Note1:<\/strong><\/em><\/p>\n\n\n\nIf the board is SMARC-FiMX6-Q-2G<\/em> or SMARC-FiMX6-D-2G<\/em>, use$ make ARCH=arm CROSS_COMPILE=${CC} smarcfimx6_quad_2g_ser3_defconfig<\/code><\/p>\n\n\n\n If the board is SMARC-FiMX6-Q-1G<\/em> or SMARC-FiMX6-D-1G<\/em>, use$ make ARCH=arm CROSS_COMPILE=${CC} smarcfimx6_quad_1g_ser3_defconfig<\/code><\/p>\n\n\n\n If the board is SMARC-FiMX6-U-1G<\/em>, use$ make ARCH=arm CROSS_COMPILE=${CC} smarcfimx6_dl_1g_ser3_defconfig<\/code><\/p>\n\n\n\n If the board is SMARC-FiMX6-S<\/em>, use$ make ARCH=arm CROSS_COMPILE=${CC} smarcfimx6_solo_ser3_defconfig<\/code><\/p>\n\n\n\nIf the board is SMARC-FiMX6-S-1G<\/em>, use$ make ARCH=arm CROSS_COMPILE=${CC} smarcfimx6_solo_1g_ser3_defconfig<\/code><\/p>\n\n\n\n If the board is SMARC-FiMX6-QP-1G<\/em>, use$ make ARCH=arm CROSS_COMPILE=${CC} smarcfimx6_quadplus_1g_ser3_defconfig<\/code><\/p>\n\n\n\n If the board is SMARC-FiMX6-QP-2G<\/em>, use$ make ARCH=arm CROSS_COMPILE=${CC} smarcfimx6_quadplus_2g_ser3_defconfig<\/code><\/p>\n\n\n\nNote 2:<\/strong><\/em><\/p>\n\n\n\n“ser3<\/em>” stands for console debug port in SMARC definition. In this example, we uses SER3 as debug port. If user uses SER0 as your debug port, make change to “ser0<\/em>” instead. Same as SER1 and SER2.<\/p>\n\n\n\nNote 3:<\/strong><\/em><\/p>\n\n\n\nThe SMARC-FiMX6<\/em> module always boot up from the on-module SPI NOR<\/em> flash. The factory default will be u-boot.imx<\/em> pre-installed with SER3 as console output. In some cases when the SPI NOR<\/em> flash is empty or needs to be upgraded. Users can shunt crossed the TEST#<\/em> to ground. In this way, the SMARC-FiMX6<\/em> module will boot up to carrier SD card, if TEST#<\/em> pin is shunt crossed. The u-boot.imx<\/em> image are the same, the difference is how you flash u-boot.imx<\/em>. This will be explained in the “Setup SD card” section.<\/p>\n<\/div><\/div>\n\n\n\nLinux Kernel<\/h2>\n\n\n\n Download:<\/p>\n\n\n\n
For Linux Kernel v6.6.52<\/strong> (Paired from NXP Yocto Scarthgap release)<\/p>\n\n\n\n<\/button><\/p>
\n
$ git clone https:\/\/github.com\/embedian\/smarc-fsl-linux-kernel.git v6.6.52 -b emb_lf-6.6.y<\/p>\n<\/div><\/div>\n\n\n\n
\n\n\n\n
<\/button>Notes<\/strong><\/strong><\/p>\n
Note 1:<\/strong><\/em><\/p>\n\n\n\nFor u-boot 2023.04<\/mark> and Linux kernel 6.1.55<\/mark> (Paired from NXP Yocto Mickledore<\/mark> release)<\/strong><\/p>\n\n\n\n$ git clone https:\/\/github.com\/embedian\/smarc-fsl-linux-kernel.git v6.1.55 -b emb_lf-6.1.y<\/code><\/code><\/p>\n\n\n\nNote 2:<\/strong><\/em><\/p>\n\n\n\nFor u-boot 2022.04<\/mark> and Linux kernel 5.15.71<\/mark> (Paired from NXP Yocto Kirkstone<\/mark> release)<\/strong><\/p>\n\n\n\n$ git clone https:\/\/github.com\/embedian\/smarc-fsl-linux-kernel.git v5.15.71 -b emb_imx_lf-5.15.y<\/code><\/code><\/p>\n<\/div><\/div>\n\n\n\nConfigure and Build:<\/p>\n\n\n\n
<\/button><\/p>
\n
$ make ARCH=arm CROSS_COMPILE=${CC} distclean<\/p>\n\n\n\n
$ make ARCH=arm CROSS_COMPILE=${CC} emb_imx_v7_defconfig<\/p>\n\n\n\n
$ make ARCH=arm CROSS_COMPILE=${CC} zImage modules dtbs<\/p>\n<\/div><\/div>\n\n\n\n
\n\n\n\n
Selecting display configuration is a matter of selecting an appropriate DTB file under arch\/arm\/boot\/dts<\/em><\/code>.<\/p>\n\n\n\nAll available DTB files are listed in the table below.<\/p>\n\n\n
\n
DTB FILENAME<\/strong><\/p><\/div><\/div><\/td>DESCRIPTION<\/strong><\/p><\/div><\/div><\/td><\/tr>imx6dl-smarc.dtb<\/em><\/p><\/div><\/div><\/td>Device tree blob i.mx6 solo and dual lite core with HDMI or parallel RGB display configuration.<\/p><\/div><\/div><\/td><\/tr>
imx6dl-smarc-wvga.dtb<\/em><\/p><\/div><\/div><\/td>Device tree blob i.mx6 solo and dual lite core with wvga resolutions LVDS display configuration.<\/p><\/div><\/div><\/td><\/tr>
imx6dl-smarc-wxga.dtb<\/em><\/p><\/div><\/div><\/td>Device tree blob i.mx6 solo and dual lite core with wxga resolutions LVDS display configuration.<\/p><\/div><\/div><\/td><\/tr>
imx6dl-smarc-xga.dtb<\/em><\/p><\/div><\/div><\/td>Device tree blob i.mx6 solo and dual lite core with xga resolutions LVDS display configuration.<\/p><\/div><\/div><\/td><\/tr>
imx6dl-smarc-1080p.dtb<\/em><\/p><\/div><\/div><\/td>Device tree blob i.mx6 solo and dual lite core with 1080p resolutions LVDS display configuration.<\/p><\/div><\/div><\/td><\/tr>
imx6q-smarc.dtb<\/em><\/p><\/div><\/div><\/td>Device tree blob i.mx6 dual and quad core with HDMI or parallel RGB display configuration.<\/p><\/div><\/div><\/td><\/tr>
imx6q-smac-wvga.dtb<\/em><\/p><\/div><\/div><\/td>Device tree blob i.mx6 dual and quad core with wvga resolutions LVDS display configuration.<\/p><\/div><\/div><\/td><\/tr>