Behöver du hjälp? Chatta med oss WhatsApp

Please, enable Compare.
Skicka din förfrågan och få en detaljerad offert anpassad efter dina behov inom 24 timmar.
Leverans – vanligtvis skickas inom tre arbetsdagar

Onlineköp erbjuder bekvämlighet under provutvecklingsfasen. För större beställningar, klicka på knappen ”Begär en offert” ovan. Vi erbjuder ett mycket bättre pris.

SMARC-FiMX6

Prisintervall: $130 till $165


  • NXP i.MX6 4/2/1 x Cortex-A9 @1GHz
  • 1GB/2GB/512MB DDR3L, 8GB eMMC
  • HDMI, LVDS, 1x GBE, 1x MIPI-CSI
  • 2x CAN, 4x UART, 4x I2C, 1x I2S, 1x PCIe, 2x SPI, 1x USB2.0 OTG, 1x USB 2.0-värd

 

or
SKU: SMARC-FiMX6-D-2G-I Category: Tag:

Dela:

SMARC-FiMX6 NXP SMARC 1.1/1.0 System-on-Module


  • Quad-/Dual-/Dual Lite-/Single-core ARM Cortex-A9, 1,2 GHz (800 MHz för industriell temperaturversion)
  • Realtids-ARM Cortex-M4-koprocessor, 266 MHz
  • Uppfyller SMARC 1.1 (S158 flytande) och 1.0 (S158 jordad)
  • Mått (B × L): 82 mm × 50 mm
  • Tillgänglighet garanterad till 2031

Höjdpunkter


2 GB / 1 GB / 512 MB DDR3L och 8 GB eMMC


HDMI, 24-bitars dubbelkanalig LVDS (1080p) samt 1 × MIPI-CSI (2 banor)


3D-GPU (Vivante GC2000) och 2D-GPU (Vivante GC355 och GC320)


VPU (Videodekodning: 1080p60 H.264; Videoenkodning: 1080p30 H.264)


1 × Gigabit Ethernet, 1 × USB 2.0 OTG, 1 × USB 2.0 Host, 2 × CAN, 4 × UART, 4 × I2C, 2 × I2S, 1 × PCIe 2.0 (1 bana), 2 × SPI, 1 × SDIO, 12 × GPIO


Industriellt temperaturområde: -40 °C till 85 °C


Yocto Project, Linux och RTOS


Fullständigt Board Support Package (BSP) med körklara avbilder


BSP de Yocto Project


Kontinuerliga BSP-uppdateringar och underhåll


Snabba upp din produktdesign


Fullständigt designpaket för bärare: scheman, komponentlista (BOM), PCB-layout och 3D STEP-filer


Direkt teknisk support från Embedians designingenjörer


Gratis designgranskning av Embedians ingenjörer


Felsökning av bärare utförd av Embedians designingenjörer


Drivaranpassning för anpassade LCD-paneler

hardware document Specifikationer

Specifications

Technical Information

Compliance

SMARC 1.1 (S158 grounded) and 1.0 (S158 floating) Compliant

Dimension (W x L)

82mm x 50mm

CPU

  • NXP i.MX6 4/2/1 x Cortex-A9 @1.2GHz (800Mhz for industrial temp.)

GPU

  • Vivante GC2000 (3D, dual and quad core, supports OpenGL ES 3.0, OpenCL and higher performance graphics.)

  • Vivante GC880 (3D, dual lite core and solo core, supports OpenGL ES 2.0 only)

  • Vivante GC355 and GC320 (2D, dual core and solo core)

  • emulated 2D on GPU + Vivante GC320 (2D, dual lite core and solo core)

  • Up to 1080p60 resolutions

VPU

  • Video Decode: 1080p 60 h.264

  • Video Encode: 1080p30 H.264

Main Memory

  • 2GB/1GB(dual lite)/512MB(solo) DDR3L

  • 8GB eMMC (5.x) onboard

  • 4MB SPI NOR Flash

  • AT24C32 EEPROM onboard

Display

  • HDMI 1.4

  • Dual Channel LVDS display

  • Up to 1080p60

Camera Interface

  • 1 x 2-lane MIPI-CSI

SDIO

One SDIO interface

  • 1 x 4-bit SDIO card interface with support lines

SPI

Two SPI interfaces with two chip selects per SPI channel.

I2S

One I2S interfaces

  • Typically used for connection to I2S audio CODECs

I2C

Four I2C interfaces

  • Power Management

  • General Purpose

  • Camera 0

  • LCD Display ID

UART


  • Four asynchronous serial ports

  • Two ports supporting four-wire handshaking (RXD, TXD, RTS#, CTS#).

  • Two ports supporting data-only signals (RXD, TXD).

CAN Bus

Two CAN 2.0b interfaces

  • Logic level signals from Module based CAN bus protocol controllers

  • RXD and TXD only

USB

  • One USB OTG 2.0 Ports with PHY

  • One USB 2.0 Host with PHY

PCIe

  • One PCIe 2.0 (1-lane)

  • Common PCIe wake signal

Gigabit Ethernet

  • One GbE MDI interfaces

  • Realtek RTL-8211FD-CG PHY on module

  • No magnetics on Module

  • LED support signals

Real-Time Clock (RTC)

External Seiko S35390A controller on module

General Purpose I/O

12 x GPIO Signals, specific alternate functions are assigned to some GPIOs

  • PWM / Tachometer capability

  • Camera support

  • CAN Error Signaling

  • HD Audio reset

System and Power Management Signals

  • Reset Out and Reset In 

  • Power Button Input

  • Power Source Sataus

  • Module Power State Status

  • System Management Pins

  • Battery and Battery 

  • Charger Management Pins

  • Carrier Power On Control Pins

Power Consumption

  • 1.55W ~ 3.6W (Typical)

Heat Sink

VTT-HS-8J064

  • Note: i.MX6 quad core and dual core need heat sink

Boot Source Select

Three pins to allow selection from carrier board. Select options include to boot from one of the following:

  • Module NOR Flash (Default)

  • Module eMMC Flash

  • Network Boot

  • Carrier SD Card (Recovery)

Power Supply

3V to 5.25V

Operates directly from single level Lithium Ion cells, or fixed 3.3V or 5V power supply

  • 1.8V (S158 grounded) or 3.3V (S158 floating) VDDIO 

Temperature

Industrial Temperature Range

-40 degree C ~ 85 degree C

Commercial Temperature Range

0 degree C ~ 60 degree C

Storage Temperature Range

-40 degree C ~ 150 degree C

Junction Temperature Range

-40 degree C ~ 150 degree C

Form Factor

SMARC 1.1 or 1.0

82 mm x 50 mm by SMARC 1.1 and 1.0 Specification

hardware document Designresurser

 

hardware document Programvaruguider

Yocto

Developer's Guide

Comprehensive Yocto developer guide for building, customizing embedded Linux systems

Android

Developer's Guide

Comprehensive Android developer guide for building, customizing embedded Linux systems

  • Android Nougat (N7.1.2_2.0.0)

    Android Nougat(Kernel 4.9)
  • Android Marshmallow (M6.0.1_2.0.1 BSP)

    Android Marshmallow (Kernel 4.1)
  • All Release

    All Android Release

SMARC-iMX8M NXP SMARC 2.0 System-on-Module


  • Uppfyller SMARC v2.0+-modulstandard
  • SMARC v2.0+-modul för uppstartsplattform för hårdvaru- och mjukvaruutveckling
  • Utvärderings- och valideringsplattform för SMARC 2.0+-moduler
  • Referensdesign för kundens carrier board
  • Prioriterad teknisk support från Embedian

Ordering Info.


Part Number: EVK-STD-CARRIER-S20


Packing Lists


1 x EVK-STD-CARRIER-S20 carrier board


4 x M2.5 screws


1 x bootable SDHC card with image pre-installed (only when purchase together with Embedian SMARC modules)


1 x LVDS cable


1 x LVDS LCD Backlight cable


1 x 12V/3.5A Power Supply


1 x SATA Power cable


1 x 10-way box header to DB9 cable (for console or RS232)


SMARC module not included)


Evaluation Bseboard Features


DC +12V ~ +24V Power input with 2.5mm DC Jack


Accept 1.8V VDDIO SMARC 2.0+ compliant module


Supports all SMARC 2.0+ I/O interfaces


Form factor: 170mm (L) x 170mm (W) (mini-ITX form factor)

hardware document Beställningsinformation

Part Number

Notes

1.

  • Q: Quad Core Cortex-A9

  • D: Dual Core Cortex-A9

  • U: Dual Lite Core Cortex-A9

  • S: Solo Core Cortex-A9

2.

  • 2GB: 2GB DDR3L memory

  • 1GB: 1GB DDR3L memory

  • Leave it blank if solo core (512MB DDR3L)

3.

  • I: Industrial Temperature (-40 degree C ~ 85 degree C); Only industrial temperature option for this part.

4.

  • C: Conforrmal Coating (Only support it for industrial temperature variants and at the mass production stage); Leave it blank if not needed.

Example

  • Part Number: SMARC-FiMX6-D-2G-I

Description: Dual core Cortex-A9 i.MX6 processor SMARC 1.1/1.0 module with 2GB DDR3L, Industrial Temperature (-40 degree C ~ 85 degree C)

  • Part Number: SMARC-FiMX6-U-1G

Description: Dial Lite core Cortex-A9 i.MX6 processor SMARC 1.1/1.0 module with 1GB DDR3L, Commercial Temperature (0 degree C ~ 60 degree C)

Optional Accessaries

Heat Sink

  • P/N: VTT-HS-8J064

Description: Heak sink for SMARC-FiMX6 (dual and quad core i.MX6 need heat sink)

Varför välja Embedian?

NXP EBS-partner

TI Direktkonto

En kultur av hög kvalitet och effektivitet

Dedikerade till ARM Cortex-plattformen i 20 år.