\n
$ md5sum am-debian-11.5-minimal-armhf-2022-10-06.tar.gz
\n\n\n\n
Yocto Morty (TI Processor SDK 04.01.00.06<\/em><\/strong>):<\/strong><\/p>\n\n\n\n
USERNAME<\/strong><\/p><\/div><\/div><\/td>PASSWORD<\/strong><\/p><\/div><\/div><\/td><\/tr>root<\/em><\/p><\/div><\/div><\/td>N\/A<\/em><\/p><\/div><\/div><\/td><\/tr><\/tbody><\/table>\n<\/div>\n<\/div>\n\n\nYocto Morty Download:<\/p>\n\n\n\n
<\/button><\/p>
\n
$ wget -c ftp:\/\/ftp.embedian.com\/public\/dev\/minfs\/dev\/minfs\/morty\/smarct437x-rootfs-image-smarct437x.tar.xz<\/p>\n<\/div><\/div>\n\n\n\n
\n\n\n\n
Verify:<\/p>\n\n\n\n
\n\n\n\n
<\/button><\/p>
\n
$ md5sum smarct437x-rootfs-image-smarct437x.tar.xz
\n\n\n\n
Setup SD Card<\/h2>\n\n\n\n For these instruction, we are assuming: DISK=\/dev\/mmcblk0<\/em>, ”lsblk” is very useful for determining the device id.<\/p>\n\n\n\n<\/button><\/p>
\n
$ export DISK=\/dev\/mmcblk0<\/p>\n<\/div><\/div>\n\n\n\n
\n\n\n\n
Erase SD card:<\/p>\n\n\n\n
\n\n\n\n
<\/button><\/p>
\n
$ sudo dd if=\/dev\/zero of=${DISK} bs=1M count=160<\/p>\n<\/div><\/div>\n\n\n\n
\n\n\n\n
Create Partition Layout: Leave 1MB offset for boot file. With util-linux v2.26, sfdisk was rewritten and is now based on libfdisk.<\/p>\n\n\n\n
\n\n\n\n
<\/button><\/p>
\n
(sfdisk)<\/strong> Create Partitions:<\/p>\n\n\n\n
<\/button><\/p>
\n
(sfdisk >=2.26.x)<\/strong> <\/button><\/p>
\n
(sfdisk <=2.25)<\/strong> ,,,-<\/code>Format Partitions:<\/p>\n\n\n\n
<\/button><\/p>
\n
for: DISK=\/dev\/mmcblk0<\/strong>for: DISK=\/dev\/sdX<\/strong>Mount Partitions:<\/p>\n\n\n\n
On some systems, these partitions may be auto-mounted…<\/strong><\/p>\n\n\n\n<\/button><\/p>
\n
$ sudo mkdir -p \/media\/boot\/<\/p>\n\n\n\n
$ sudo mkdir -p \/media\/rootfs\/<\/p>\n\n\n\n
for: DISK=\/dev\/mmcblk0<\/strong>for: DISK=\/dev\/sdX<\/strong>Install Bootloader<\/strong><\/p>\n\n\n\n\n
<\/path><\/svg><\/span>If on-module SPI NOR Flash is not empty<\/strong><\/span><\/div>\n<\/div><\/div>\n\n\n\nThe MLO.byteswap and u-boot.img is pre-installed in SPI NOR<\/em> flash at factory default. SMARC-T4378<\/em> is designed to always boot u-boot from SPI NOR<\/em> flash and to load zImage and root file systems based on the setting of BOOT_SEL<\/em>. If users need to fuse their own u-boot or perform u-boot upgrade. This section will instruct you how to do that.<\/p>\n\n\n\nCopy MLO.byteswap<\/em> and u-boot.imx <\/em>to the first boot partition of your SD card. <\/p>\n\n\n\n