SMARC-iMX93 NXP SMARC 2.2 模块化系统
- 双核 ARM Cortex-A55 CPU,1.7GHz
- 集成 AI/ML 神经网络处理单元
- 实时 ARM Cortex-M33 协处理器
- 符合 SMARC 2.2 标准(82mm x 50mm)
- 供应保证至 2038 年
功能亮点 | |
Yocto Project、Debian、Linux 和 RTOS | |
| |
加速您的产品设计 | |
+886 (2) 8772 3291
No products in the cart.
$120
$300
You can add any HTML here
We suggest you to create a Saved Template in Dashboard -> Templates -> Saved Templates and use it by switching content type above to Saved template.
You can add any HTML here
We suggest you to create a Saved Template in Dashboard -> Templates -> Saved Templates and use it by switching content type above to Saved template.
在线购买在样品开发阶段提供便利。对于大宗订单,请点击上方的“获取报价”按钮。我们将为您提供更优惠的价格。
$100 – $140价格范围:$100 至 $140
功能亮点 | |
1GB 或 2GB LPDDR4 内存,16GB eMMC 存储 24 位单通道 LVDS、MIPI-DSI 以及双通道(2-LANE)MIPI-CSI 认证的 802.11a/b/g/n/ac/ax + 蓝牙 5.3 模块(可选) 2 个千兆以太网端口(其中一个支持 TSN),1 个 USB OTG,4 个 USB 2.0,1 个 SDIO,2 个 CAN-FD,4 个 UART,4 个 I2C,2 个 I2S,2 个 SPI,12 个 GPIO 宽温范围:-40°C 至 85°C | |
Yocto Project、Debian、Linux 和 RTOS | |
完整的板级支持包(BSP)和可直接运行的镜像 Yocto 项目和 Debian BSP(板级支持包) 持续的 BSP 更新与维护 |
|
加速您的产品设计 | |
完整载板设计套件 – 原理图、物料清单(BOM)、PCB 布局及 3D STEP 文件 Embedian 设计工程师直接提供技术支持 Embedian 工程师免费设计评审 载板调试由 Embedian 设计工程师执行 定制 LCD 面板驱动程序适配服务 |
规格Specifications | ||
Technical Information | ||
Compliance | SMARC 2.2 Compliant | |
Dimension (W x L) | 82mm x 50mm | |
CPU | NXP i.MX9352 2 x 1.7GHz Cortex-A55 Core Real-time 250Mhz ARM Cortex-M33 ARM Ethos-U65 microNPU (ML) 0.5 TOPs PxP 2D GPU | |
Main Memory | 16-bit 1GB/2GB LPDDR4x up to 3200MT/s 16GB eMMC (5.x) onboard AT24C32 EEPROM onboard | |
Display | Single Channel LVDS display (up to 1366x768@60Hz or 1280x800@60Hz) MIPI DSI (up to 1920x1080p60) | |
Camera Interface | 1 x 2-lane MIPI-CSI | |
SDIO | One SDIO interface 1 x 4-bit SDIO card interface with support lines 1 x SDIO Wi-Fi 11a/b/g/n/ac/ax + Bluetooth 5.3 module (Optional) | |
SPI | Two SPI interfaces with two chip selects per SPI channel. | |
I2S | Two I2S interfaces | |
I2C | Typically used for connection to I2S audio CODECs Four I2C interfaces Power Management General Purpose Camera port 0 LCD Display ID | |
UART | LCD Display ID Two ports supporting four-wire handshaking (RXD, TXD, RTS#, CTS#) Two ports supporting data-only signals (RXD, TXD) | |
FlexCAN Bus | Two CAN-FD interfaces Logic level signals from Module based FlexCAN bus protocol controllers RXD and TXD only | |
USB | One USB OTG 2.0 Ports with PHY Four USB 2.0 Host with PHY USB support signals (VBUS enable, Over-current detect, USB ID signals) | |
Gigabit Ethernet | Two GbE MDI interfaces One port supports QoS with TSN Realtek RTL-8211FD on module No magnetics on Module LED support signals | |
Real-Time Clock (RTC) | External Micro Crystal RV-8263-C8 RTC controller on module | |
General Purpose I/O | 12 x GPIO Signals, specific alternate functions are assigned to some GPIOs PWM / Tachometer capability Camera support CAN Error Signaling HD Audio reset | |
System and Power Management Signals | Reset Out and Reset In Power Button Input Power Source Sataus Module Power State Status System Management Pins Battery and Battery Charger Management Pins Carrier Power On Control Pins | |
Power Consumption (Typical) | 2.1W or 4W (with WIFI Module) | |
Boot Source Select | Three pins to allow selection from carrier board. Select options include to boot from one of the following: Module eMMC Flash (Default) Network Boot Carrier SD Card (Recovery) | |
Power Supply | ||
3V to 5.25V | Operates directly from single level Lithium Ion cells, or fixed 3.3V or 5V power supply 1.8V VDDIO | |
Temperature | ||
Industrial Temperature Range | -40 degree C ~ 85 degree C | |
Commercial Temperature Range | 0 degree C ~ 60 degree C | |
Storage Temperature Range | -40 degree C ~ 150 degree C | |
Junction Temperature Range | -40 degree C ~ 150 degree C | |
Form Factor | ||
SMARC 2.2 | 82 mm x 50 mm by SMARC 2.2 Specification | |
设计资源
软件指南Yocto Developer's Guide label Comprehensive Yocto developer guide for building, customizing embedded Linux systems
![]() | Debian Developer's Guide label Comprehensive Debian developer guide for building, customizing embedded Linux systems
![]() | Real-Time Edge Developer's Guide label Real-Time Edge Software enables deterministic Linux, industrial networking, low latency applications.
![]() |
Ordering Info. | |
Part Number: EVK-STD-CARRIER-S20 |
Packing Lists | |
1 x EVK-STD-CARRIER-S20 carrier board 4 x M2.5 screws 1 x bootable SDHC card with image pre-installed (only when purchase together with Embedian SMARC modules) 1 x LVDS cable 1 x LVDS LCD Backlight cable 1 x 12V/3.5A Power Supply 1 x SATA Power cable 1 x 10-way box header to DB9 cable (for console or RS232) SMARC module not included) |
|
Evaluation Bseboard Features | |
DC +12V ~ +24V Power input with 2.5mm DC Jack Accept 1.8V VDDIO SMARC 2.0+ compliant module Supports all SMARC 2.0+ I/O interfaces Form factor: 170mm (L) x 170mm (W) (mini-ITX form factor) |
|
订购信息
Notes |
1 1G: 1GB LPDDR4x 2G: 2GB LPDDR4x |
2. I: Industrial Temperature (-40 degree C ~ 85 degree C); Leave it blank if using commercial temperature. |
3. W: WiFi and Bluetooth; Leave it blank if not needed. |
4. C: Conforrmal Coating (Only support it for industrial temperature variants and at the mass production stage); Leave it blank if not needed. |
Examples |
Part Number: SMARC-iMX93-I-C Description: i.MX93 SMARC 2.2 module with 1GB LPDDR4x, Industrial Temperature (-40 degree C ~ 85 degree C) and Conformal Coating |
Part Number: SMARC-iMX93-2G-W Description: i.MX93 SMARC 2.2 module with 2GB LPDDR4x, WiFi/BT on module and commercial temperature. |