pITX-MX8M-PLUS

概览

规格

文档

软件

pITX-MX8M-PLUS NXP pico-ITX 单板计算机 (SBC)

四核/双核 ARM Cortex-A53，1.8GHz
集成 2.3 TOPS AI/ML 神经处理单元
实时 ARM Cortex-M7 协处理器，800MHz
pico-ITX（100mm × 72mm）尺寸及被动散热方案
供货保证至 2038 年

功能亮點
2GB 或 4GB LPDDR4 内存，16GB eMMC GPU（OpenGL ES 3.0，OpenCL 1.2，Vulkan） VPU（视频解码：1080p60，h.265/4，VP9，VP8；视频编码：1080p60，h.265/4） HDMI（4Kp30）接口及 2 × MIPI-CSI（2 通道和 4 通道） 24 位双通道 LVDS（1080p）或 MIPI-DSI（1920×1440p60）接口 1 × 2 通道和 1 × 4 通道 MIPI-CSI FPC 接口 1 × M.2（SDIO/UART/USB 2.0/I2C/PCIe/I2S）Key E 接口用于 WiFi 1 × mPCIe 接口（仅支持 4G/5G LTE、USB 3.1 和 2.0） 2 × GbE（其中一个支持 TSN）RJ-45 接口 2 × USB 3.0 Type A，1 × mini USB 客户端接口 1 × I2S 音频接口 1 × 50 针扩展接口（4 × UART，1 × USB 3.1，2 × USB 2.0，2 × I2C，1 × SPI，6 × GPIO，2 × CAN-FD） 1 × 电源指示 LED，1 × 可编程 LED 1 × 重置按钮 1 × RTC 电池接口宽温工作范围：-40°C 至 85°C

Yocto Project、Ubuntu、Debian、Android、Linux 及 RTOS
完整的主板支持包（BSP）及可即時運行的映像 Yocto Project、Ubuntu、Debian 及 Android BSP 持續的 BSP 更新與維護

加速您的产品设计
完整的设计套件——BSP 与 3D STEP 文件由 Embedian 设计工程师提供直接的技术支持由 Embedian 工程师提供免费的设计审查为定制 LCD 面板提供驱动适配服务

规格参数

Specifications
Technical Information
Form Factor	pico-ITX
Dimension (W x L x H)	100mm x 72mm x 19mm
CPU	NXP i.MX8M PLUS 4 x Cortex-A53 @1.8GHz Real-time 800MHz ARM Cortex-M7
Main Memory	32-bit 2GB/4GB LPDDR4x up to 3200MT/s 16GB eMMC (5.x) onboard AT24C32 EEPROM onboard
NPU	2.3 TOP/s Neural Network performance Keyword detect, noise reduction, beamforming Speech recognition (i.e. Deep Speech 2) Image recognition (i.e. ResNet-50)
Display	HDMI 2.0a connector (up to 4Kp30) Dual Channel LVDS connector (up to 1920x1200@60Hz), Backlight Power 5V or 12V, Max. 1.5A MIPI DSI (up to 1920x1440p60) shared with second channel LVDS interface
TPM	Support TPM 2.0
Gigabit Ethernet	2 x RJ45 connector along the board edge NXP i.MX8M Plus integrated RGMII (one supports QoS with TSN and one can support Ethercat protocols) One (eqos) can support TSN, one (fec) can support ethercat (real-time edge software) Speed: 10/100/1000 Mbps PHY: Realtek RTL8211FD(I)-CG
USB	One USB OTG 2.0 Connector (Mini Type B) Two USB 3.1 Host Ports (Type A) One USB 2.0 signals on mPCIe One USB 3.1 signals on mPCIe One USB 2.0 host signal set on the M.2 2230 Key E connector One USB 3.1 host signals and three USB 2.0 host signals on EIO 50-pin 2.0mm expansion box header
Camera Interface	1 x 2-lane and 1 x 4-lane MIPI-CSI 2 x 0.5mm 24P FPC(V) Connector on the rear side
SD interface	one 4-bit microSD connector
nanoSIM card socket	1 x Nano SIM Card Socket
SPI	Two SPI interfaces with two chip selects per SPI channel.
Audio	6-pin 1.25mm header Audio Codec: WM8960 Headphone Out Microphone In 6-pin box heade
LED	1 x green power indication LED 1 x yellow programmable LED
M.2 Type 2230 Key E Connector	One M.2 Type 2230 Key E Connector Support 1 x 4-bit SDIO Support 1 x USB 2.0 signals Support 1 x 4-wire UARTs Support 1 x I2C signals Support 1 x PCIe 1-lane signals Support 1 x I2S signals Support 88W8997 chipset WiFi/Bluetooth M.2 cards (like Azureware AW-CM276MA-PUR)
mPCIe Connector	One mPCIe Connector Support 1 x USB 3.1 signals Support 1 x USB 2.0 signals Designed for 4G/5G LTE module
UART	Six UARTS 1 x 2-wire on debug header 1 x 4-wire on M.2 Connector 1 × 4‑wire and 3 × 2‑wire interfaces on the EIO 50‑pin 2.0 mm expansion box header
RTC	Backup Battery by 2-pin type connector External Seiko S-35390A RTC controller
Reset	1 Reset Button
Rear I/O Expansion Header	EIO50 50-pin 2.00mm Box Header that includes 1 x USB 3.1 Host 2 x USB 2.0 Host 2 x CAN-FD (TTL) 1 x SPI 2 x I2C 4 x UARTs (1 x 4-wire and 3 x 2-wire) 6 x GPIOs
General Purpose I/O	6 x GPIOs on EIO 50-pin box header
Boot Source Select	Select options include to boot from one of the following: eMMC Flash (Default) microSD Card (Recovery)
Power Supply
12V input	Power Supply Voltage: 12V DC-IN by lockable DC Jack (or 2-pin type connector by BOM option) AT mode Power Consumption: 7.21 W
Expansion
1 x M.2 2230 Key E Slot (USB .0/I2C/UART/PCIe/UART/SDIO/I2S) 1 x mPCIe (USB 2.0 and USB 3.1) EIO50 50-pin 2.00mm Box Header (4 x UARTs, 1 x USB 3.1, 2 x USB 2.0, 2 x I2C, 1 x SPI, 6 GPIOs, 2 x CAN-FD) SD Socket: 1 x Micro SD Socket
Temperature
Industrial Temperature Range	-40 degree C ~ 85 degree C
Commercial Temperature Range	0 degree C ~ 60 degree C
Storage Temperature Range	-40 degree C ~ 150 degree C
Junction Temperature Range	-40 degree C ~ 150 degree C
Form Factor
pITX	Dimensions: 100 x 72 x 18 mm Weight: 0.2kg
Certifications
CE/FCC class B

设计资源

软件指南

Yocto Developer's Guide label ; Comprehensive Yocto developer guide for building, customizing embedded Linux systems Scarthgap Yocto Scarthgap (Kernel 6.6.52) Mickledore Yocto Mickledore (Kernel 6.1.55) Kirkstone Yocto Kirkstone (Kernel 5.15.71) All Release All SMARC-iMX8 Yocto Release	Debian Developer's Guide label ; Comprehensive Debian developer guide for building, customizing embedded Linux systems Debian 12 Bookworm Debian Bookworm (Kernel 6.6.52) Debian 11 Bullseye Debian Bullseys (Kernel 5.10.9) All Release All Debian Release	Ubuntu Developer's Guide label ; Comprehensive Ubuntu developer guide for building, customizing embedded Linux systems Ubuntu 22.04 Ubuntu 22.04(Kernel 6.1.55) All Release All Ubuntu Release	Real-Time Edge Developer's Guide label ; Real-Time Edge Software enables deterministic Linux, industrial networking, low latency applications. RT Edge v3.1 Real-Time Edge v3.1 (Kernel 6.6.36) RT Edge v2.5 Real-Time Edge v2.5 (Kernel 5.15.71)	Android Developer's Guide label ; Comprehensive Android developer guide for building, customizing embedded Linux systems Android 15 Android 15(Kernel 6.6.58) All Release All Android Release

分享：

pITX-MX8M-PLUS NXP pico-ITX 单板计算机 (SBC)

规格参数

设计资源

软件指南

为什么选择 Embedian？

NXP EBS 合作伙伴

TI 直销账户

高质量与高效率的企业文化

深耕 ARM Cortex 平台 20 年

常用链接

客户服务

关注我们

支付方式

Recommended for you Refresh

Need a Quote for This Product?

对这款产品有疑问吗？

pITX-MX8M-PLUS

分享：

pITX-MX8M-PLUS NXP pico-ITX 单板计算机 (SBC)

规格参数

设计资源

软件指南

为什么选择 Embedian？

NXP EBS 合作伙伴

TI 直销账户

高质量与高效率的企业文化

深耕 ARM Cortex 平台 20 年