需要協助嗎？與我們線上聊天 WhatsApp

專注於 ARM Cortex-A 系統模組的領導品牌

我們正在慶祝公司成立 20 週年

比較
Please, enable Compare.
心願清單

No products in the wishlist.

Return To Shop
瀏覽 產品
比較
心願清單

+886 (2) 8772 3291

購物車

No products in the cart.

Return To Shop
Shopping cart (0)
Subtotal: $0

查看購物車Checkout

Spend $350 to get free shipping Congratulations! You've got free shipping.
取得報價
提問
提交需求後，24 小時內即可收到符合您需求的詳細報價。
運送說明 - 通常三個工作天內出貨

線上購買在樣品開發階段提供便利。若為大宗訂單，請點擊上方『取得報價』按鈕，我們將提供更優惠的價格。

SMARC-FiMX6

價格範圍：$130 到 $165

  • NXP i.MX6，4 / 2 / 1 × Cortex-A9 @ 1GHz
  • 1GB / 2GB / 512MB DDR3L，8GB eMMC
  • HDMI、LVDS、1 × GBE、1 × MIPI-CSI
  • 2 × CAN、4 × UART、4 × I2C、1 × I2S、1 × PCIe、2 × SPI、1 × USB 2.0 OTG、1 × USB 2.0 Host

 

or
Add to Wishlist
SKU: SMARC-FiMX6-D-2G-I Category: Tag:

分享：

SMARC-FiMX6 NXP SMARC 1.1/1.0 系統模組（System-on-Module）

  • 四核心 / 雙核心 / 雙核心 Lite / 單核心 ARM Cortex-A9，1.2 GHz（工業級溫度版本為 800 MHz）
  • 即時 ARM Cortex-M4 協處理器，266 MHz
  • 符合 SMARC 1.1（S158 浮接）與 1.0（S158 接地）規範
  • 尺寸（寬 × 長）：82 mm × 50 mm
  • 供貨保證至 2031 年

功能亮點


2GB / 1GB / 512MB DDR3L 與 8GB eMMC


HDMI、24 位元雙通道 LVDS（1080p），以及 1 × MIPI-CSI（2 通道）


3D GPU（Vivante GC2000）與 2D GPU（Vivante GC355 與 GC320）


VPU（視訊解碼：1080p60 H.264；視訊編碼：1080p30 H.264）


1 × Gigabit 乙太網路、1 × USB 2.0 OTG、1 × USB 2.0 Host、2 × CAN、4 × UART、4 × I2C、2 × I2S、1 × PCIe 2.0（1 通道）、2 × SPI、1 × SDIO、12 × GPIO


工業級工作溫度範圍：-40°C 至 85°C

[wptb id="11333" not found ]

加速您的產品設計


完整載板設計套件 – 原理圖、物料清單（BOM）、PCB 佈局及 3D STEP 檔案


Embedian 設計工程師直接提供技術支援


Embedian 工程師免費設計審查


載板除錯由 Embedian 設計工程師執行


自訂 LCD 面板驅動程式調整服務

hardware document 技術規格

Specifications

Technical Information

Compliance

SMARC 1.1 (S158 grounded) and 1.0 (S158 floating) Compliant

Dimension (W x L)

82mm x 50mm

CPU

  • NXP i.MX6 4/2/1 x Cortex-A9 @1.2GHz (800Mhz for industrial temp.)

GPU

  • Vivante GC2000 (3D, dual and quad core, supports OpenGL ES 3.0, OpenCL and higher performance graphics.)

  • Vivante GC880 (3D, dual lite core and solo core, supports OpenGL ES 2.0 only)

  • Vivante GC355 and GC320 (2D, dual core and solo core)

  • emulated 2D on GPU + Vivante GC320 (2D, dual lite core and solo core)

  • Up to 1080p60 resolutions

VPU

  • Video Decode: 1080p 60 h.264

  • Video Encode: 1080p30 H.264

Main Memory

  • 2GB/1GB(dual lite)/512MB(solo) DDR3L

  • 8GB eMMC (5.x) onboard

  • 4MB SPI NOR Flash

  • AT24C32 EEPROM onboard

Display

  • HDMI 1.4

  • Dual Channel LVDS display

  • Up to 1080p60

Camera Interface

  • 1 x 2-lane MIPI-CSI

SDIO

One SDIO interface

  • 1 x 4-bit SDIO card interface with support lines

SPI

Two SPI interfaces with two chip selects per SPI channel.

I2S

One I2S interfaces

  • Typically used for connection to I2S audio CODECs

I2C

Four I2C interfaces

  • Power Management

  • General Purpose

  • Camera 0

  • LCD Display ID

UART


  • Four asynchronous serial ports

  • Two ports supporting four-wire handshaking (RXD, TXD, RTS#, CTS#).

  • Two ports supporting data-only signals (RXD, TXD).

CAN Bus

Two CAN 2.0b interfaces

  • Logic level signals from Module based CAN bus protocol controllers

  • RXD and TXD only

USB

  • One USB OTG 2.0 Ports with PHY

  • One USB 2.0 Host with PHY

PCIe

  • One PCIe 2.0 (1-lane)

  • Common PCIe wake signal

Gigabit Ethernet

  • One GbE MDI interfaces

  • Realtek RTL-8211FD-CG PHY on module

  • No magnetics on Module

  • LED support signals

Real-Time Clock (RTC)

External Seiko S35390A controller on module

General Purpose I/O

12 x GPIO Signals, specific alternate functions are assigned to some GPIOs

  • PWM / Tachometer capability

  • Camera support

  • CAN Error Signaling

  • HD Audio reset

System and Power Management Signals

  • Reset Out and Reset In 

  • Power Button Input

  • Power Source Sataus

  • Module Power State Status

  • System Management Pins

  • Battery and Battery 

  • Charger Management Pins

  • Carrier Power On Control Pins

Power Consumption

  • 1.55W ~ 3.6W (Typical)

Heat Sink

VTT-HS-8J064

  • Note: i.MX6 quad core and dual core need heat sink

Boot Source Select

Three pins to allow selection from carrier board. Select options include to boot from one of the following:

  • Module NOR Flash (Default)

  • Module eMMC Flash

  • Network Boot

  • Carrier SD Card (Recovery)

Power Supply

3V to 5.25V

Operates directly from single level Lithium Ion cells, or fixed 3.3V or 5V power supply

  • 1.8V (S158 grounded) or 3.3V (S158 floating) VDDIO 

Temperature

Industrial Temperature Range

-40 degree C ~ 85 degree C

Commercial Temperature Range

0 degree C ~ 60 degree C

Storage Temperature Range

-40 degree C ~ 150 degree C

Junction Temperature Range

-40 degree C ~ 150 degree C

Form Factor

SMARC 1.1 or 1.0

82 mm x 50 mm by SMARC 1.1 and 1.0 Specification

hardware document 设计资源

 

hardware document 軟體指南

Yocto

Developer's Guide

Comprehensive Yocto developer guide for building, customizing embedded Linux systems

Android

Developer's Guide

Comprehensive Android developer guide for building, customizing embedded Linux systems

  • Android Nougat (N7.1.2_2.0.0)

    Android Nougat(Kernel 4.9)

  • Android Marshmallow (M6.0.1_2.0.1 BSP)

    Android Marshmallow (Kernel 4.1)

  • All Release

    All Android Release

SMARC-iMX8M NXP SMARC 2.0 系統模組（SoM）

  • 符合 SMARC v2.0+ 模組規範
  • 適用於硬體與軟體開發的 SMARC v2.0+ 模組啟動平台
  • SMARC 2.0+ 模組評估與驗證平台
  • 客戶載板（Carrier Board）設計參考
  • 由 Embedian 提供的優先技術支援

Ordering Info.


Part Number: EVK-STD-CARRIER-S20

Packing Lists


1 x EVK-STD-CARRIER-S20 carrier board


4 x M2.5 screws


1 x bootable SDHC card with image pre-installed (only when purchase together with Embedian SMARC modules)


1 x LVDS cable


1 x LVDS LCD Backlight cable


1 x 12V/3.5A Power Supply


1 x SATA Power cable


1 x 10-way box header to DB9 cable (for console or RS232)


SMARC module not included)

Evaluation Bseboard Features


DC +12V ~ +24V Power input with 2.5mm DC Jack


Accept 1.8V VDDIO SMARC 2.0+ compliant module


Supports all SMARC 2.0+ I/O interfaces


Form factor: 170mm (L) x 170mm (W) (mini-ITX form factor)

hardware document 訂購資訊

Part Number

Notes

1.

  • Q: Quad Core Cortex-A9

  • D: Dual Core Cortex-A9

  • U: Dual Lite Core Cortex-A9

  • S: Solo Core Cortex-A9

2.

  • 2GB: 2GB DDR3L memory

  • 1GB: 1GB DDR3L memory

  • Leave it blank if solo core (512MB DDR3L)

3.

  • I: Industrial Temperature (-40 degree C ~ 85 degree C); Only industrial temperature option for this part.

4.

  • C: Conforrmal Coating (Only support it for industrial temperature variants and at the mass production stage); Leave it blank if not needed.

Example

  • Part Number: SMARC-FiMX6-D-2G-I

Description: Dual core Cortex-A9 i.MX6 processor SMARC 1.1/1.0 module with 2GB DDR3L, Industrial Temperature (-40 degree C ~ 85 degree C)

  • Part Number: SMARC-FiMX6-U-1G

Description: Dial Lite core Cortex-A9 i.MX6 processor SMARC 1.1/1.0 module with 1GB DDR3L, Commercial Temperature (0 degree C ~ 60 degree C)

Optional Accessaries

Heat Sink

  • P/N: VTT-HS-8J064

Description: Heak sink for SMARC-FiMX6 (dual and quad core i.MX6 need heat sink)

為什麼選擇 Embedian？

NXP EBS 合作夥伴

TI 直營帳戶

追求高品質與高效率的企業文化

深耕 ARM Cortex 平台 20 年