SMARC-iMX8 NXP SMARC 2.0 系统模块
- 双核 ARM Cortex-A72 CPU(1.6GHz)及四核 ARM Cortex-A53(1.2GHz)
- 实时 2× ARM Cortex-M4F 协处理器
- 符合 SMARC 2.0(82mm × 50mm)规范
- 供货保证至 2038 年
功能亮点 | |
| |
Yocto Project、Ubuntu、Debian、Linux 和 RTOS | |
| |
加速您的产品设计 | |
+886 (2) 8772 3291
No products in the cart.
$100 – $140价格范围:$100 至 $140
$165
$300
功能亮点 | |
4GB 或 8GB LPDDR4 以及 32GB eMMC HDMI、24 位双通道 LVDS、eDP 和 2 × MIPI-CSI(2-LANE 和 4-LANE) GPU(OpenGL ES 3.2、OpenVX 1.01、OpenCL 2.0、OpenVG 1.1) VPU(4K H.265 解码;1080p H.264 编码) 2 × 千兆以太网(支持 AVB)、1 × USB 3.0、1 × USB OTG、4 × USB 2.0、2 × CAN-FD、4 × UART、6 × I2C、2 × I2S、2 × PCIe 3.0(1-LANE)、1 × SATA 3.0、2 × SPI、TPM、1 × SDIO、12 × GPIO 宽温工作范围:-40°C 至 85°C |
|
Yocto Project、Ubuntu、Debian、Linux 和 RTOS | |
完整的板级支持包(BSP)和可直接运行的镜像 Yocto Project、Ubuntu 和 Debian BSP 持续的 BSP 更新与维护 |
|
加速您的产品设计 | |
完整载板设计套件 – 原理图、物料清单(BOM)、PCB 布局及 3D STEP 文件 Embedian 设计工程师直接提供技术支持 Embedian 工程师免费设计评审 载板调试由 Embedian 设计工程师执行 定制 LCD 面板驱动程序适配服务 |
规格
Specifications | ||
Technical Information | ||
Compliance | SMARC 2.0 Compliant | |
Dimension (W x L) | 82mm x 50mm | |
CPU | NXP i.MX8 2 x 1.6GHz Cortex-A72 Core and 4 x 1.2GHz Cortex-A53 Real-time 2 x ARM Cortex-M4F | |
GPU | 2 x Vivante GC7000XSVX high performance GPU Supports OpenGL ES 3.2, OpenVX 1.01, OpenCL 2.0 and OpenVG 1.1 | |
VPU | 4k h.265 Decode, 1080p h.264 encodeXP i.MX9352 2 x 1.7GHz Cortex-A55 Core | |
Main Memory | 32-bit 4GB/8GB LPDDR4 up to 3200MT/s 32GB eMMC (5.x) onboard AT24C32 EEPROM onboard | |
Display | HDMI 2.0a with HDCP 2.2 and DP 1.3 Dual Channel LVDS display (up to 1920x1080@60Hz) eDP 1.4 (from MIPI-DSI) | |
TPM | Support TPM 2.0 | |
Camera Interface | 1 x 2-lane and 1 x 4-lane MIPI-CS | |
SDIO | One SDIO interface 1 x 4-bit SDIO card interface with support lines | |
SPI | Two SPI interfaces with two chip selects per SPI channel. | |
I2S | Two I2S interfaces Typically used for connection to I2S audio CODECs | |
SATA | One SATA interface SATA Gen 3.0 | |
PCIe | 2 x PCIe Gen 3.0 Lane configuration: 1 x PCIe x2 or 2 x PCIe x1 | |
I2C | Six I2C interfaces Power Management General Purpose Camera 0 Camera 1 LCD Display ID HDMI | |
UART | Four asynchronous serial ports Two ports supporting four-wire handshaking (RXD, TXD, RTS#, CTS#). Two ports supporting data-only signals (RXD, TXD). | |
FlexCAN Bus | Two CAN-FD interfaces Logic level signals from Module based FlexCAN bus protocol controllers RXD and TXD only | |
USB | One USB OTG 2.0 Ports with PHY Four USB 2.0 Host with PHY One USB 3.0 Host with PHY | |
Gigabit Ethernet | Two GbE MDI interfaces Qualcomm AR8035 PHY on module No magnetics on Module LED support signals | |
Real-Time Clock (RTC) | External Seiko S35390A controller on module | |
General Purpose I/O | 12 x GPIO Signals, specific alternate functions are assigned to some GPIOs PWM / Tachometer capability Camera support CAN Error Signaling HD Audio reset | |
System and Power Management Signals | Reset Out and Reset In Power Button Input Power Source Sataus Module Power State Status System Management Pins Battery and Battery Charger Management Pins Carrier Power On Control Pins | |
Power Consumption | 3.5 W (Typical) | |
Boot Source Select | Three pins to allow selection from carrier board. Select options include to boot from one of the following: Module eMMC Flash (Default) Network Boot Carrier SD Card (Recovery) | |
Power Supply | ||
3V to 5.25V | Operates directly from single level Lithium Ion cells, or fixed 3.3V or 5V power supply 1.8V VDDIO | |
Temperature | ||
Industrial Temperature Range | -40 degree C ~ 85 degree C | |
Commercial Temperature Range | 0 degree C ~ 60 degree C | |
Storage Temperature Range | -40 degree C ~ 150 degree C | |
Junction Temperature Range | -40 degree C ~ 150 degree C | |
Form Factor | ||
SMARC 2.0 | 82 mm x 50 mm by SMARC 2.0 Specification | |
设计资源
软件指南
Yocto Developer's Guide label Comprehensive Yocto developer guide for building, customizing embedded Linux systems
![]() | Debian Developer's Guide label Comprehensive Debian developer guide for building, customizing embedded Linux systems
![]() | Ubuntu Developer's Guide label Comprehensive Ubuntu developer guide for building, customizing embedded Linux systems
![]() |
Ordering Info. | |
Part Number: EVK-STD-CARRIER-S20 |
Packing Lists | |
1 x EVK-STD-CARRIER-S20 carrier board 4 x M2.5 screws 1 x bootable SDHC card with image pre-installed (only when purchase together with Embedian SMARC modules) 1 x LVDS cable 1 x LVDS LCD Backlight cable 1 x 12V/3.5A Power Supply 1 x SATA Power cable 1 x 10-way box header to DB9 cable (for console or RS232) SMARC module not included) |
|
Evaluation Bseboard Features | |
DC +12V ~ +24V Power input with 2.5mm DC Jack Accept 1.8V VDDIO SMARC 2.0+ compliant module Supports all SMARC 2.0+ I/O interfaces Form factor: 170mm (L) x 170mm (W) (mini-ITX form factor) |
|
订购信息
Notes |
1 6: DSP in CPU 5: No DSP in CPU |
2 QM: CPU is QuadMax Core, 2 x Cortex-A72 + 4 x Cortex-A53 QP: CPU is QuadPlus Core, 1 x Cortex-A72 + 4 x Cortex-A53 |
3 8G: 8GB LPDDR4 memory 4G: 4GB LPDDR4 memory |
4. I: Industrial Temperature (-40 degree C ~ 85 degree C); Leave it blank if using commercial temperature. |
5. C: Conforrmal Coating (Only support it for industrial temperature variants and at the mass production stage); Leave it blank if not needed. |
Examples |
Part Number: SMARC-iMX8-5-QM-8G-I Description: QuadMax core i.MX8 processor without DSP SMARC 2.0 module with 8GB LPDDR4, Industrial Temperature (-40 degree C ~ 85 degree C) |
Part Number: SMARC-iMX8-5-QP-4G-I Description: QuadPlus core i.MX8 processor without DSP SMARC 2.0 module with 4GB LPDDR4, Industrial Temperature (-40 degree C ~ 85 degree C) |
Optional Accessaries |
Heat Sinlk |
P/N: VTT-HS-8J066B1 |
Description: Heak sink for SMARC-iMX8MP and SMARC-iMX8 |