pITX-MX8M-PLUS

100mm x 72mm x 19mm

NXP i.MX8M PLUS 4 x Cortex-A53 @1.8GHz

Real-time 800MHz ARM Cortex-M7

32-bit 2GB/4GB LPDDR4x up to 3200MT/s

16GB eMMC (5.x) onboard

AT24C32 EEPROM onboard

2.3 TOP/s Neural Network performance

Keyword detect, noise reduction, beamforming

Speech recognition (i.e. Deep Speech 2)

Image recognition (i.e. ResNet-50)

HDMI 2.0a connector (up to 4Kp30)

Dual Channel LVDS connector (up to 1920x1200@60Hz), Backlight Power 5V or 12V, Max. 1.5A

MIPI DSI (up to 1920x1440p60) shared with second channel LVDS interface

2 x RJ45 connector along the board edge

NXP i.MX8M Plus integrated RGMII (one supports QoS with TSN and one can support Ethercat protocols)

One (eqos) can support TSN, one (fec) can support ethercat (real-time edge software)

Speed: 10/100/1000 Mbps

PHY: Realtek RTL8211FD(I)-CG

One USB OTG 2.0 Connector (Mini Type B)

Two USB 3.1 Host Ports (Type A)

One USB 2.0 signals on mPCIe

One USB 3.1 signals on mPCIe

One USB 2.0 host signal set on the M.2 2230 Key E connector

One USB 3.1 host signals and three USB 2.0 host signals on EIO 50-pin 2.0mm expansion box header

1 x 2-lane and 1 x 4-lane MIPI-CSI

2 x 0.5mm 24P FPC(V) Connector on the rear side

one 4-bit microSD connector

1 x Nano SIM Card Socket

Audio Codec: WM8960

Headphone Out

Microphone In

6-pin box heade

1 x green power indication LED

1 x yellow programmable LED

Support 1 x 4-bit SDIO

Support 1 x USB 2.0 signals

Support 1 x 4-wire UARTs

Support 1 x I2C signals

Support 1 x PCIe 1-lane signals

Support 1 x I2S signals

Support 88W8997 chipset WiFi/Bluetooth M.2 cards (like Azureware AW-CM276MA-PUR)

Support 1 x USB 3.1 signals

Support 1 x USB 2.0 signals

Designed for 4G/5G LTE module

1 x 2-wire on debug header

1 x 4-wire on M.2 Connector

1 × 4‑wire and 3 × 2‑wire interfaces on the EIO 50‑pin 2.0 mm expansion box header

Backup Battery by 2-pin type connector

External Seiko S-35390A RTC controller

1 Reset Button

1 x USB 3.1 Host

2 x USB 2.0 Host

2 x CAN-FD (TTL)

1 x SPI

2 x I2C

4 x UARTs (1 x 4-wire and 3 x 2-wire)

6 x GPIOs

eMMC Flash (Default)

microSD Card (Recovery)

Power Supply Voltage: 12V DC-IN by lockable DC Jack (or 2-pin type connector by BOM option)

AT mode

Power Consumption: 7.21 W

1 x M.2 2230 Key E Slot (USB .0/I2C/UART/PCIe/UART/SDIO/I2S)

1 x mPCIe (USB 2.0 and USB 3.1)

EIO50 50-pin 2.00mm Box Header (4 x UARTs, 1 x USB 3.1, 2 x USB 2.0, 2 x I2C, 1 x SPI, 6 GPIOs, 2 x CAN-FD)

SD Socket: 1 x Micro SD Socket

Dimensions: 100 x 72 x 18 mm

Weight: 0.2kg