pITX-OSM-iMX93

NXP i.MX9352 2 x 1.7GHz Cortex-A55 Core

Real-time 250Mhz ARM Cortex-M33

ARM Ethos-U65 microNPU (ML) 0.5 TOPs

PxP 2D GPU

16-bit 1GB/2GB LPDDR4x up to 3200MT/s

16GB eMMC (5.x) onboard

M24C32 EEPROM onboard

HDMI (up to 1920x1080p60) Connector

implement via LT9611UXC MIPI-DSI to HDMI bdrige

2 x RJ45 connector along the board edge

NXP i.MX93 integrated two RGMIIs

One (eqos) can support TSN, one (fec) can support ethercat

Speed: 10/100/1000 Mbps

PHY: Realtek RTL8211FD(I)-CG

One USB OTG 2.0 Connector (Mini Type B)

Two USB 2.0 Host Connector (Type A) on the board edge

One USB 2.0 host signal set on the M.2 2230 Key E connector

One USB 2.0 Host signals set on the EIO 50-pin 2.0mm expansion box header

1 x 2-lane MIPI-CSI

0.5mm 24P FPC(V) Connector on the rear side

one 4-bit microSD connector

One SPI interfaces on the EIO 50‑pin 2.0 mm expansion box header

One SPI on two 1x6P 2.00mm headers (one cs# each)

1 x green power indication LED

1 x yellow programmable LED

Support 1 x 4-bit SDIO

Support 1 x USB 2.0 signals

Support 1 x 4-wire UARTs

Support iW612 chipset WiFi/Bluetooth M.2 cards (like u-blox M2-MAYA-W271-00C)

1 x 2-wire on debug header)

1 x 4-wire on M.2 Connector

1 × 4‑wire and 2 × 2‑wire interfaces on the EIO 50‑pin 2.0 mm expansion box header

Backup Battery by 2-pin type connector

External Micro Crystal RV-8263-C8 RTC controller

1 Reset ButtonOne USB OTG 2.0 Ports with PHY

2 x USB 2.0 Host

2 x CAN-FD (TTL)

1 x SPI

2 x I2C

3 x UARTs (1 x 4-wire and 2 x 2-wire)

6 x GPIOs

eMMC Flash (Default)

microSD Card (Recovery)

Power Supply Voltage: 12V DC-IN by lockable DC Jack (or 2-pin type connector by BOM option)

AT or ATX mode

Power Consumption: 3.5 W

1 x M.2 2230 Key E Slot (USB 2.0/UART/SDIO)

EIO50 50-pin 2.00mm Box Header (3 x UARTs, 2 x USB 2.0, 2 x I2C, 1 x SPI, 6 GPIOs, 2 x CAN-FD)

SD Socket: 1 x Micro SD Socket

Dimensions: 100 x 72 x 18 mm

Weight: 0.2kg