SMARC-FiMX7

Aperçu

SMARC-FiMX7 NXP SMARC 2.0 Module système (System-on-Module)

ARM Cortex-A7 double cœur, 1,0 GHz
Coprocesseur temps réel ARM Cortex-M4, 200 MHz
Conforme à la norme SMARC 2.0 (82 mm × 50 mm)
Disponibilité garantie jusqu’en 2035

Points forts
1 Go DDR3L et 8 Go eMMC LVDS double canal 24 bits (1080p) et 1 × MIPI-CSI (2 voies) GPU (ePxP G2D) 2 × Ethernet Gigabit, 2 × USB 2.0 OTG, 2 × CAN, 4 × UART, 4 × I2C, 2 × I2S, 1 × PCIe 2.1 (1 voie), 2 × SPI, 1 × SDIO, 12 × GPIO Plage de température étendue : -20 °C à 80 °C

[wptb id="11334" not found ]

Accélérez la conception de votre produit
Pack complet de conception de carte porteuse – schémas, nomenclature (BOM), disposition PCB et fichiers 3D STEP Support technique direct par les ingénieurs de conception Embedian Revue de conception gratuite par les ingénieurs Embedian Débogage de la carte porteuse par les ingénieurs de conception Embedian Service d’adaptation de pilotes pour panneaux LCD personnalisés

Spécifications

Specifications
Technical Information
Compliance	SMARC 2.0 Compliant
Dimension (W x L)	82mm x 50mm
CPU	NXP i.MX7 2 x Cortex-A7 @1.0GHz Real-time 200MHz ARM Cortex-M4
GPU	ePxP G2D Up to 1080p60 resolutions
Main Memory	1GB DDR3L 8GB eMMC (5.x) onboard 4MB SPI NOR Flash on board AT24C32 EEPROM onboard
Display	Dual Channel LVDS display (up to 1920x1080@60Hz)
Camera Interface	1 x 2-lane MIPI-CSI
SDIO	One SDIO interface 1 x 4-bit SDIO card interface with support lines
SPI	Two SPI interfaces with two chip selects per SPI channel.
I2S	One I2S interface Typically used for connection to I2S audio CODECs
I2C	Four I2C interfaces Power Management General Purpose Camera 0 LCD Display ID
UART	Four asynchronous serial ports Two ports supporting four-wire handshaking (RXD, TXD, RTS#, CTS#). Two ports supporting data-only signals (RXD, TXD).
CAN Bus	Two CAN 2.0b interfaces Logic level signals from Module based CAN bus protocol controllers RXD and TXD only
USB	Two USB OTG 2.0 Ports with PHY
PCIe	Common PCIe wake signal
Gigabit Ethernet	Two GbE MDI interfaces Realtek RTL-8211FD-CG PHY on module No magnetics on Module LED support signals
Real-Time Clock (RTC)	External Seiko S35390A controller on module
General Purpose I/O	12 x GPIO Signals, specific alternate functions are assigned to some GPIOs PWM / Tachometer capability Camera support CAN Error Signaling HD Audio reset
System and Power Management Signals	Reset Out and Reset In Power Button Input Power Source Sataus Module Power State Status System Management Pins Battery and Battery Charger Management Pins Carrier Power On Control Pins
Power Consumption	1.2 W (Typical) 1.6 W (Max)
Boot Source Select	Three pins to allow selection from carrier board. Select options include to boot from one of the following: Module NOR Flash (Default) Module eMMC Flash Network Boot Carrier SD Card (Recovery)
Power Supply
3V to 5.25V	Operates directly from single level Lithium Ion cells, or fixed 3.3V or 5V power supply 1.8V VDDIO
Temperature
Extendedl Temperature Range	-20 degree C ~ 80 degree C
Commercial Temperature Range	0 degree C ~ 60 degree C
Storage Temperature Range	-40 degree C ~ 150 degree C
Junction Temperature Range	-40 degree C ~ 150 degree C
Form Factor
SMARC 2.0	82 mm x 50 mm by SMARC 2.0 Specification

Ressources de conception

Guides logiciels

Yocto Developer's Guide label ; Comprehensive Yocto developer guide for building, customizing embedded Linux systems Scarthgap Yocto Scarthgap (Kernel 6.6.52) Mickledore Yocto Mickledore (Kernel 6.1.55) Kirkstone Yocto Kirkstone (Kernel 5.15.71) All Release All SMARC-FiMX6 Yocto Release

SMARC-iMX8M NXP SMARC 2.0 Module sur Système (SoM)

Conformité au module SMARC v2.0+
Plateforme de mise en service SMARC v2.0+ pour le développement matériel et logiciel
Plateforme d’évaluation et de validation du module SMARC 2.0+
Référence de conception de carte porteuse client
Support technique prioritaire fourni par Embedian

Ordering Info.
Part Number: EVK-STD-CARRIER-S20

Packing Lists
1 x EVK-STD-CARRIER-S20 carrier board 4 x M2.5 screws 1 x bootable SDHC card with image pre-installed (only when purchase together with Embedian SMARC modules) 1 x LVDS cable 1 x LVDS LCD Backlight cable 1 x 12V/3.5A Power Supply 1 x SATA Power cable 1 x 10-way box header to DB9 cable (for console or RS232) SMARC module not included)

Evaluation Bseboard Features
DC +12V ~ +24V Power input with 2.5mm DC Jack Accept 1.8V VDDIO SMARC 2.0+ compliant module Supports all SMARC 2.0+ I/O interfaces Form factor: 170mm (L) x 170mm (W) (mini-ITX form factor)

Informations de commande

Notes
1.	D: Dual Core Cortex-A7 S: Solo Core Cortex-A7(512MB DDR3L, Only for projects with quantity)
Example
Part Number: *SMARC-FiMX7-D* Description: Dual core Cortex-A7 i.MX7 processor SMARC 2.0 module with 1GB DDR3L Extended Temperature (-20 degree C ~ 80 degree C)

Partager :

SMARC-FiMX7 NXP SMARC 2.0 Module système (System-on-Module)

Spécifications

Ressources de conception

Guides logiciels

SMARC-iMX8M NXP SMARC 2.0 Module sur Système (SoM)

Informations de commande

Pourquoi choisir Embedian ?

Partenaire EBS de NXP

Compte Direct TI

Une culture de haute qualité et d’efficacité

20 ans d’expertise sur la plateforme ARM Cortex

Liens utiles

Service client

Nos réseaux sociaux

Méthodes de paiement

Recommended for you Refresh

SMARC-FiMX7

Partager :

SMARC-FiMX7 NXP SMARC 2.0 Module système (System-on-Module)

Spécifications

Ressources de conception

Guides logiciels

SMARC-iMX8M NXP SMARC 2.0 Module sur Système (SoM)

Informations de commande

Pourquoi choisir Embedian ?

Partenaire EBS de NXP

Compte Direct TI

Une culture de haute qualité et d’efficacité

20 ans d’expertise sur la plateforme ARM Cortex