Add to Cart:
Max: 50
Please Choose:SMARC-T3354-600SMARC-T3354-01GSMARC-T3354-800-ISMARC-T3354-800-I-CSMARC-T335X Computer-on-Modules based on TI Sitara AM335X ARM Cortex-A8 technology (600MHz, 800MHz or 1GHz). This product is aiming to replace current ARM9, ARM11 and part of the Cortex-A8 markets in higher resolution displays, faster performance and multiple, flexible integrated connectivity options -- all while keep the power level low and price competitive. SMARC-T335X is ideal for the customers who would need to have multiple carrier boards around a single system on module. Technical Information
Part Number
Example: SMARC-T3354-600: 600Mhz SMARC-T3354 module in normal temperature
Processor:
TI Sitara AM335X
SGX530 hardware acceleration
ARM Cortex-A8 at 600MHz, 800MHz or 1GHz
Memory:
Onboard 8GB eMMC Flash (eMMC 5.x)
Onboard 512MB DDR3L (400Mhz x 2)
Onboard AT24C32 EEPROM
Networking:
2 x 10/100 Mbps Ethernet
Display:
Parallel LCD 18-bit/24-bit
Expansion:
1 x SDHC/SDIO, 1 x USB 2.0 Host
USB:
1 x USB 2.0 Host, 1 x USB 2.0 OTG
Additional Interface:
3 x UARTs
2 x SPIs
3 x I2C
1 x I2S
1 x CAN Bus
RTC (Seiko S35390-A)
3 x PWMs
12 x GPIOs
4 x ADCs (for resistive touchscreen)
Software:
Linux 4.9.41 (Based on TI Processor SDK 04.01.00.06) or
Linux 4.4.12 (Based on TI Processor SDK 03.00.00.04) or
Linux 4.1.10 (Based on TI Processor SDK 02.00.01.07) or
Linux 3.14.43 (Based on TI Processor SDK 01.00.00.03) or
Linux 3.12.y (Based on TI AMSDK 7.0.1) or
Linux 3.2 (Based on TI AMSDK 6.0.0)
Support Ubuntu 14.04/16.04 LTS or Debian 9 rootfs
Support Yocto Project
Power Consumption:
2 Watts Typical
Environment
Thermal:
Normal Temperature: 0oC ~ 60oC
Industrial Temperature: -40o ~85oC
Humidity:
10% ~ 90% relative humidity, non-condensed
Power Supply
3V to 5.25V:
Operates directly from single level Lithium Ion cells, or fixed 3.3V or 5V power supply
Form Factor
SMARC:
82 mm x 50 mm by SMARC Specification
Evaluation Kit (EVK-SMARC-T335X)
Features:
5V Power input with terminal block connector and miswiring protection
Invisible reset jumper
LED backlight driver onboard
RTC backup battery
Buzzer
18-bit LVDS and 24-bit LVDS connector
2 x 10/100Mbps RJ-45 connector
1 x serial debug RJ-48 connector
1 x USB host type A connector, 1 x mini USB client connector
1 x 4-wire touch connector
1 x CAN BUS header, 2 x RS232 header (One can be configured as RS422/485), 1 x 2x7-pin GPIO header, Audio Mic. in and Speaker out header
2 x I2C Connector (for capacitive touch), 2 x SPI connector
1 x SDHC connector
A single 4KB EEPROM is provided on I2C0 that holds the board information. This information includes board name, serial number, and revision information.
1 x external watchdog reset
jumpers for LCD 3.3V or 5V voltage, boot selection, RS232 or RS485 selection
Form factor: 102mm (L) x 145mm (W) (3.5-inch form factor)
Document Deliverable
Linux BSP
Carrier Board Design Guide
User’s Manual
Carrier Board Reference Schematics (pdf and OrCAD format)
PinMux file for TI PinMux Utility
Toolchain
Ordering Information
Part Number:
Description
SMARC-T3354-600
SMARC with TI AM3354 running at 600MHz in normal temperature
SMARC-T3354-01G
SMARC with TI AM3354 running at 1GHz in normal temperature
SMARC-T3354-800-I
SMARC with TI AM3354 running at 800MHz in industrial temperature
EVK-SMARC-T335X-XXX
SMARC-T335X Evaluation Board, Package includes a SMARC-T335X module, a baseboard, a 5V/3A Power Supply, 4 2.5mm M3 screws and a RJ-48 to DB9 console cable
EVK-SMARC-T335X-XXX-I
SMARC-T335X-I Evaluation Board, Package includes a SMARC-T335X-I module, a baseboard, a 5V/3A Power Supply, 4 2.5mm M3 screws and a RJ-48 to DB9 console cable
Customers who bought this product also purchased... |