|
|
| SMARC 1.1 (S158 grounded) and 1.0 (S158 floating) Compliant |
| |
| NXP i.MX6 4/2/1 x Cortex-A9 @1.2GHz (800Mhz for industrial temp.)
|
| Vivante GC2000 (3D, dual and quad core, supports OpenGL ES 3.0, OpenCL and higher performance graphics.) Vivante GC880 (3D, dual lite core and solo core, supports OpenGL ES 2.0 only) Vivante GC355 and GC320 (2D, dual core and solo core) emulated 2D on GPU + Vivante GC320 (2D, dual lite core and solo core) Up to 1080p60 resolutions
|
| Video Decode: 1080p 60 h.264 Video Encode: 1080p30 H.264
|
| 2GB/1GB(dual lite)/512MB(solo) DDR3L
|
| Dual Channel LVDS display
|
| |
| 1 x 4-bit SDIO card interface with support lines
|
| Two SPI interfaces with two chip selects per SPI channel. |
| Typically used for connection to I2S audio CODECs
|
| |
| Four asynchronous serial ports
Two ports supporting four-wire handshaking (RXD, TXD, RTS#, CTS#). Two ports supporting data-only signals (RXD, TXD).
|
| Logic level signals from Module based CAN bus protocol controllers
|
| One USB OTG 2.0 Ports with PHY
One USB 2.0 Host with PHY
|
| |
| Realtek RTL-8211FD-CG PHY on module
|
| External Seiko S35390A controller on module |
| 12 x GPIO Signals, specific alternate functions are assigned to some GPIOs PWM / Tachometer capability
|
System and Power Management Signals | Module Power State Status Carrier Power On Control Pins
|
| |
| Note: i.MX6 quad core and dual core need heat sink
|
| Three pins to allow selection from carrier board. Select options include to boot from one of the following: Module NOR Flash (Default)
Carrier SD Card (Recovery)
|
|
| Operates directly from single level Lithium Ion cells, or fixed 3.3V or 5V power supply 1.8V (S158 grounded) or 3.3V (S158 floating) VDDIO
|
|
Industrial Temperature Range | -40 degree C ~ 85 degree C |
Commercial Temperature Range | |
Storage Temperature Range | -40 degree C ~ 150 degree C |
Junction Temperature Range | -40 degree C ~ 150 degree C |
|
| 82 mm x 50 mm by SMARC 1.1 and 1.0 Specification |
| | |