| pITX-OSM-iMX93 features NXP i.MX93 dual cores 1.7GHz ARM Cortex-A55 and 250MHz real-time Cortex-M33 co-processor, and integrates the Arm Ethos-U65 microNPU for machine learning. With advanced security, excellent graphics processing, and scalability, it is ideal for embedded systems and IoT devices. Upon the standard I/Os on the coastline, pITX-OSM-iMX93 also offers the possibility of I/O Extension on the rear side by a 50-pin 2.00mm box header (EIO50) to provide flexible I/Os like more USB, I2C, RS232/485, SPI and CAN-FD for your specific vertical requirements. In addition to that, an M.2 connectors on board make the WiFi fuctions ready to use. Features and Functionality Part Number   
 Example: pITX-OSM-iMX93-2G stands for dual core i.MX93 processor with 2GB LPDDR4 memory in commercial operating temperature. Form Factor  Pico-ITX and passive cooling solution Processor  NXP i.MX93 Dual Core Cortex-A55 (Up to 1.7GHz)  PxP 2D GPU Memory  1GB or 2GB LPDDR4x 4000MT/s   Flash: 16GB eMMC(5.x)  EEPROM: 4M (to store board part number, revision number, serial number and MAC address) NPU  0.5 TOPS ARM Ethos-U65 microNPU (ML) Neural Network performance  Display  HDMI: 1 x HDMI 2.1a, up to 1920 x 1080 at 60Hz (from MIPI-DSI to HDMI Bridge) 2 x Ethernet (RJ-45)  Chipset: NXP i.MX93 integrated RGMII  One supports QoS with TSN  Speed: 10/100/1000 Mbps  PHY: Realtek RTL8211FD(I)-CG RTC  RTC Backup Battery by 2-pin type connector  Reset  1 Reset Button  IO  USB: 2 x USB 2.0 Host (Type A), 1x USB 2.0 OTG (Mini Type B)  Debug: 1 x UART as debug console by pin header  Camera Input: 1 x 2-Lane MIPI-CSI2 Rear Expansion IO  EIO50 50-pin 2.00mm Box Header  2 x USB 2.0 Host, 2 x CAN-FD, 1 x SPI, 2 x I2C, 3 x UARTs and 6 x GPIOs LED  1 x Green Power LED  1 x Yellow User Programmable LED Expansion  1 M.2 2230 Key E Slot (USB 2.0/UART/SDIO)  EIO50 50-pin 2.00mm Box Header (3 x UARTs, 2 x USB 2.0, 2 x I2C, 1 x SPI, 6 GPIOs, 2 x CAN-FD)  SD Socket: 1 x Micro SD Card Socket Power  Power Supply Voltage: 12V DC-IN by lockable DC Jack (or 2-pin type connector by BOM option)  Power Consumption: 7.21 W Environment  Operational Temperature: 0o ~ 60o C (Commercial) / -40o ~ 85o C (Industrial)  Operating Humidity: 5% ~ 95% Relatively Humidity, non-condensing Mechanical  Dimensions: 100 x 72 x 19 mm  Weight: 0.08Kg (0.1Kg with Heat Sink) Certifications  CE/FCC Class B Boot Source Select Select options to include boot from one of the following:
 
 Ordering Information pITX-OSM-iMX93-1G  pITX-OSM-iMX93 SBC with 1GB LPDDR4, 16GB eMMC, Commercial Temp.  pITX-OSM-iMX93-1G-I  pITX-OSM-iMX93 SBC with 1GB LPDDR4, 16GB eMMC, Industrial Temp.  pITX-OSM-iMX93-2G  pITX-OSM-iMX93-2G SBC with 2GB LPDDR4, 16GB eMMC, Commercial Temp.  pITX-OSM-iMX93-2G-I  pITX-OSM-iMX93 SBC with 2GB LPDDR4, 16GB eMMC, Industrial Temp.  Heat Sink Solution Heat Sink: Software Linux: Based on NXP 6.1.55_2.2.0 or 6.6.3_1.0.0 Yocto Project Support Packing List Packing List 1 x pITX-OSM-iMX93 SBC Optional Accessories pITX-IOB-2201  50-pin IO Extension Board with 2 x CAN, 3 x RS232, 1 x RS484 (Terminal Blocks), 1 x USB 2.0 Type-A, 1 x USB 2.0+3.0 Type-A, SPI, I2C  126010101245-00  Dipole Ant. D.B 2.4/5G WIFI 3dBi SMA/M BLK  12506100003HF4-00  Antenna Cable SMA (F) to MHF4 (F), 100mm  50-pin I/O expansion board (pITX-IOB-2201) Features: 1 x USB 3.0+2.0 dual-stack Type A connector 1 x USB 2.0 Type A Connector 1 x SPI Header 3 x RS232, 1 x RS485 2 x CAN-FD 6 x GPIO (-24V-24V) 2 x 2-pin I2C 2.0mm Header Capacitity Touch RST and INT Header 146mm x 31mm |