Languages:  English  Traditional Chinese  
ARM Cortex SMARC Module
$59.00 for orders of 1,000+



  • NXP i.MX8M Plus 4 x 1.8GHz ARM Cortex-A53
  • M.2 and mini-PCIe
  • 2 x GBE LAN (one w/TSN)
  • Wi-Fi and 4G/5G Ready
  • 50-pin EIO50 expansion

Possible Applications

  • eCockpit
  • Motorcycle Engine Control Unit
  • Medical Imaging
  • Smart Home Robotic Appliance
  • Avionics
  • Electricity Generation
  • Energy Gateway
  • Automatic Vehicle Identification
  • Motion Control and Robotics
  • 3-Phase AC Induction Motor

pITX-MX8M-PLUS features NXP i.MX8M Plus quad cores 1.8GHz ARM Cortex-A53 and 800MHz real-time Cortex-M7 co-processor. It is capable of providing outstanding Edge AI inference at 2.3 TOPS to perform well on Object Detection as well as Image Segmentation.
Upon the standard I/Os on the coastline, pITX-MX8M-Plus also offers the possibility of I/O Extension on the rear side by a 50-pin 2.00mm box header (EIO50) to provide flexible I/Os like more USB, I2C, RS232/285, SPI and CAN for your specific vertical requirements. In addition to that, an M.2 and mini-PCIe connectors on board make the WiFi and 4G/5G fuctions ready to use.

Features and Functionality
Part Number
pITX-MX8M-PLUS part number
  • 1: 2G (2GB LPDDR4 memory up to 4000MT/s)
        4G (4GB LPDDR4 memory up to 4000MT/s)
        6G (only for large project)
  • 2: I: Industrial temperature (-40oC ~ 85oC); Leave it Blank if you do not need it.

Example: pITX-MX8M-PLUS-4G stands for Quad core i.MX8M Plus processor with NPU and 4GB LPDDR4 memory in commercial operating temperature.

Form Factor
Pico-ITX and passive cooling solution

NXP i.MX8M Plus Quad ARM Core Cortex-A53 (Up to 1.8GHz)

2GB or 4GB LPDDR4 4000MT/s (6GB optional)

Flash: 16GB eMMC(5.x)

EEPROM: 4M (to store board part number, revision number, serial number and MAC address)

2.3 TOPS Neural Network performance

HDMI: 1 x HDMI 2.0a, up to 3840 x 2160 at 30Hz

LVDS: 1 x Single Channel or 1 x Dual Channel 24 bit Bit LVDS, Backlight Power 5V or 12V, Max. 1.5A

MIPI-DSI: 1 4-Lane MIPI-DSI (shared with second channel LVDS interface)

Graphic (GPU) Engine
GC7000UL with 2D/3D Graphic Acceleration supporting 1G Pixel/s

OpenVG 1.1, OpenGL ES3.1, Vulkan, and OpenCL 1.2 FP

H/W Video Codec (VPU)
Decoder: 1080p60 HEVC/H.265 Main, VP9 Profile 0/2, VP8, AVC/H.264 Baseline/Main/High

Encoder: 1080p60 AVC/H.264, HEVC/H.265

2 x Ethernet (RJ-45)
Chipset: NXP i.MX8M Plus integrated RGMII

One supports QoS with TSN

Speed: 10/100/1000 Mbps

PHY: Realtek RTL8211FD(I)-CG

Watchdog Timer
Chipset: TI TPS3828-33DBVR

o 200ms timeout timer

Support TPM 2.0 ((ST33HTPH2X32AHE1 chipset)

Audio Codec WM8960

Headphone Out

Microphone In

RTC Backup Battery by 2-pin type connector

1 Reset Button

USB: 2 x USB 3.1 Gen 1 Host (Type A), 1x USB client (Mini Type B)

Debug: 1 x UART as debug console by pin header

Camera Input: 2 x 4-Lane MIPI-CSI2

Rear Expansion IO
EIO50 50-pin 2.00mm Box Header

1 x USB 3.1 Host, 3 x USB 2.0 Host, 2 x CAN-FD, 1 x SPI, 2 x I2C, 4 x UARTs and 6 x GPIOs

1 x Green Power LED

1 x Yellow User Programmable LED

1 Mini-PCIe: 1 x Full Size Mini-PCIe Slot (USB 3.1 and USB 2.0 Signals only)

1 M.2 2230 Key E Slot (USB 2.0/I2C/UART/PCIe/UART/SDIO/I2S)

EIO50 50-pin 2.00mm Box Header (4 x UARTs, 1 x USB 3.1, 2 x USB 2.0, 2 x I2C, 1 x SPI, 6 GPIOs, 2 x CAN-FD)

SD Socket: 1 x Micro SD Card Socket

SD Socket: 1 x Nano SIM Card Socket

Power Supply Voltage: 12V DC-IN by lockable DC Jack (or 2-pin type connector by BOM option)

Power Consumption: 7.21 W

Operational Temperature: 0o ~ 60o C (Commercial) / -40o ~ 85o C (Industrial)

Operating Humidity: 5% ~ 95% Relatively Humidity, non-condensing

Dimensions: 100 x 72 x 19 mm

Weight: 0.05Kg (0.25Kg with Heat Sink)

CE/FCC Class B

Boot Source Select
Three pins to allow selection

Select options to include boot from one of the following:
  • eMMC Flash
  • Micro SD Card (Default)

Ordering Information
pITX-MX8M-PLUS SBC with 2GB LPDDR4, 16GB eMMC, Commercial Temp.

pITX-MX8M-PLUS SBC with 2GB LPDDR4, 16GB eMMC, Industrial Temp.

pITX-MX8M-PLUS SBC with 4GB LPDDR4, 16GB eMMC, Commercial Temp.

pITX-MX8M-PLUS SBC with 4GB LPDDR4, 16GB eMMC, Industrial Temp.

Heat Sink Solution
Heat Sink:

Note: The heat sink is a MUST for this product.

Linux and Android:
Based on NXP imx_5.10.9_1.0.0

Yocto Project Support

Debian 11 Bullseye Support

Android 11.0.0_2.0.0

Packing List
Packing List
1 x pITX-MX8M-Plus SBC

Optional Accessories
Audio HP Out, Mic In and Line In Cable

Heat Sink for pITX-MX8M-PLUS

7-inch LVDS Display G070VW01 V0

LVDS Cable for 7-inch G070VW01 V0

LVDS Backlight Cable for 7-inch G070VW01 V0

M.2 WiFi Module (IEEE 802.11a/b/g/n/ac Wireless LAN 2T2R and Bluetooth 5.3 Combo Module with 88W8997 chipset)

50-pin IO Extension Board with 2 x CAN, 3 x RS232, 1 x RS484 (Terminal Blocks), 1 x USB 2.0 Type-A, 1 x USB 2.0+3.0 Type-A, SPI, I2C

Dipole Ant. D.B 2.4/5G WIFI 3dBi SMA/M BLK

Antenna Cable SMA (F) to MHF4 (F), 100mm

50-pin expansion board (pITX-IOB-2201)
1 x USB 3.0+2.0 dual-stack Type A connector

1 x USB 2.0 Type A Connector

1 x SPI Header

3 x RS232, 1 x RS485

2 x CAN-FD

6 x GPIO (-24V-24V)

2 x 2-pin I2C 2.0mm Header

Capacitity Touch RST and INT Header

146mm x 31mm

Your IP Address is: